An engineer is configuring router R1 with an IPv6 static route for prefix 2019:C15C:0CAF:E001::/64.

R1(config)#ipv6 route 2019:C15C:0CAF:E001::/64 2019:C15C:0CAF:E002::1. IPv6 static routes are configured in global configuration mode with the ipv6 route command. The destination prefix comes first, followed by the next-hop IPv6 address or exit interface information. The options using ip route are IPv4 syntax and cannot install an IPv6 route. The options shown in interface configuration mode are also invalid for adding a global static route. Cisco CCNA 200-301 v1.1 IP Connectivity expects engineers to separate IPv4 and IPv6 routing syntax and to recognize that an IPv6 route to a /64 prefix is not configured with the IPv4 ip route command. The corrected answer uses ipv6 route 2019:C15C:0CAF:E001::/64 with the next-hop address 2019:C15C:0CAF:E002::1. That directs traffic for the destination IPv6 network toward the specified next hop.