The Samba configuration file contains the following lines:A workstation is on the wired network with...

 The host allow option in the smb.conf file specifies the hosts or networks that are allowed to access the Samba server. The hosts can be specified by name, IP address, or network address with a netmask. The host allow option can also include the special name localhost, which refers to the local machine. The host allow option can be overridden by the host deny option, which specifies the hosts or networks that are denied access to the Samba server. The host deny option has a higher priority than the host allow option.

In this question, the host allow option is set to 192.168.1.100 192.168.2.0/24 localhost, which means that only the host with the IP address 192.168.1.100, the hosts on the network 192.168.2.0/24 (from 192.168.2.1 to 192.168.2.254), and the local machine can access the Samba server. This explains why a wireless laptop with an IP address 192.168.2.93 can access the Samba server, but a workstation on the wired network with an IP address 192.168.1.177 cannot. Almost every machine on the wired network is unable to access the Samba server because they are not included in the host allow option.

To fix this problem, the host allow option should be changed to include the entire wired network, which is assumed to be 192.168.1.0/24 (from 192.168.1.1 to 192.168.1.254). This can be done by using the network address and the netmask, or by using a range of IP addresses. The host allow option should also keep the wireless network and the localhost in the list, so that the existing access is not denied. Therefore, the correct answer is E. host allow = 192.168.1.0/255.255.255.0 192.168.2.0/255.255.255.0 localhost. This will allow any host on either network, or the local machine, to access the Samba server, without denying access to anyone else.