A wireless engineer must design a backhaul link.

In Cisco mesh networking architecture, access points are classified into two primary roles: Root Access Points (RAP) and Mesh Access Points (MAP). A RAP is an access point that maintains a wired Ethernet backhaul connection back to the network infrastructure, while a MAP operates wirelessly, relying on mesh backlinks to upstream RAPs. When an engineer needs to change an AP mode — such as switching to bridge mode to extend the mesh — the AP role must first be defined correctly. The AP must be designated as a RAP before any mode-level configuration changes are applied. This sequencing is critical because the AP role defines the fundamental backhaul path; changing the mode without first establishing the role results in misconfiguration and potential connectivity loss. The RAP communicates directly with the wired infrastructure via its Ethernet port, making it the gateway for all downstream MAPs in the mesh topology. Options A (monitor), C (bridge), and D (local) refer to AP modes, not roles, and cannot be configured until the role is properly defined. Reference: WLSD Study Guide — Mesh Networking Fundamentals, Outdoor Wireless Design, AP Role and Mode Configuration.