An engineer is designing a network for a customer running a wireless network with a...

Because the wireless access points must remain in a common VLAN, the practical design is to align the HSRP active gateway with the spanning-tree root bridge for that VLAN. Unicast flooding commonly occurs when a Layer 2 domain is stretched between aggregation and access layers and the traffic path becomes asymmetric. If the HSRP active gateway is on one aggregation switch while STP forwards the Layer 2 path through a different aggregation switch, return traffic can be forced across inter-switch links and CAM table aging can create flooding conditions. Cisco campus design guidance emphasizes aligning Layer 2 and Layer 3 forwarding roles so the active default gateway and spanning-tree root are colocated for each VLAN. Migrating to routed access is usually the best long-term design, but it requires the APs to run on separate VLANs; the question states they use a common VLAN. Reducing ARP timers to match CAM timers can help some flooding cases, but it is not the core design fix offered here. Reference topics: HSRP and STP alignment, unicast flooding, Layer 2 campus design, wireless AP VLAN design.