Refer to the exhibit.

Refer to the exhibit.

aaa new-model

aaa authentication dot1x default group ISE-SERVERS

aaa authorization network default group ISE-SERVERS

aaa accounting dot1x default start-stop group ISE-SERVERS

!

radius server RADIUS_SRV

address ipv4 172.16.10.12 auth-port 1812 acct-port 1813

key shared-secret C1sc0123

!

aaa group server radius ISE-SERVERS

server name RADIUS_SRV

radius-server vsa send authentication

radius-server vsa send accounting

radius-server attribute 6 on-for-login-auth

radius-server attribute 8 include-in-access-req

radius-server attribute 25 access-request include

ip device tracking

!

interface range GigabitEthernet1/0/1 - 48

switchport

switchport host

authentication priority dot1x mab

authentication order dot1x mab

A security engineer is integrating a new Cisco Catalyst access switch with Cisco ISE to enforce port-based network access control using 802.1X. The AAA RADIUS server group and access interfaces are configured on the Cisco Catalyst switch. Cisco ISE has authentication and authorization policies, the workstation supplicants are configured as expected, and connectivity between the switch and ISE is working. During testing, the workstations fail to trigger authentication sessions, and no RADIUS requests appear in the ISE logs or on the switch interfaces. Which two configuration commands must be added to the Cisco Catalyst switch? (Choose two.)