How many frames are exchanged for 802.

Two frames are exchanged for 802.11 authentication in the 6 GHz band when WPA3-Enterprise is not used, and a passphrase is used instead. Authentication is a process that establishes an identity relationship between a STA (station) and an AP (access point) before joining a BSS (Basic Service Set). There are two types of authentication methods defined by 802.11: Open System Authentication and Shared Key Authentication. Open System Authentication does not require any credentials or security information from a STA to join a BSS, and it consists of two frames: an Authentication Request frame sent by the STA to the AP, and an Authentication Response frame sent by the AP to the STA. Shared Key Authentication requires a shared secret key from a STA to join a BSS, and it consists of four frames: two challenge-response frames in addition to the request-response frames. However, Shared Key Authentication uses WEP (Wired Equivalent Privacy) as its encryption algorithm, which is insecure and deprecated. In the 6 GHz band, which is a newly available frequency band for WLANs, Shared Key Authentication is prohibited by the 802.11 standard, as it poses security and interference risks for other users and services in the band. The 6 GHz band requires all WLANs to use WPA3-Personal or WPA3-Enterprise encryption methods, which are more secure and robust than previous encryption methods such as WPA2 or WEP. WPA3-Personal uses a passphrase to derive a PMK (Pairwise Master Key), while WPA3-Enterprise uses an authentication server to obtain a PMK. Both methods use SAE (Simultaneous Authentication of Equals) as their authentication protocol, which replaces PSK (Pre-Shared Key) or EAP (Extensible Authentication Protocol). SAE consists of two frames: an SAE Commit frame sent by both parties to exchange elliptic curve parameters and nonces, and an SAE Confirm frame sent by both parties to verify each other’s identities and generate a PMK. Therefore, when WPA3-Enterprise is not used, and a passphrase is used instead in the 6 GHz band, only two frames are exchanged for 802.11 authentication: an SAECommit frame and an SAE Confirm frame. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 8: Security Analysis, page 220-221