A network operator wants to make sure voice data is prioritized.

A network operator who wants to make sure voice data is prioritized should assign it to Ethernet traffic class 6. Ethernet traffic class is a term used to refer to the priority code point (PCP) field in the VLAN header of an Ethernet frame. The PCP field is a 3-bit field that can encode up to eight different priority levels, ranging from 0 (lowest) to 7 (highest). The PCP values can be mapped to different types of traffic according to their QoS requirements. The recommended mapping is as follows :

PCP 0: Best effort (default)

PCP 1: Background

PCP 2: Spare

PCP 3: Excellent effort

PCP 4: Controlled load

PCP 5: Video

PCP 6: Voice

PCP 7: Network control

Voice data is a type of real-time traffic that requires the highest priority and lowest delay in the network. Therefore, it should be assigned to PCP 6, which corresponds to Ethernet traffic class 6 .

References: [IEEE 802.1Q - Wikipedia], [What is “link aggregation” and how does it benefit your network? | PC Gamer]