A BIG-IP Administrator needs to install aHotFixon a standalone BIG-IP device.

When installing a software upgrade with a HotFix on BIG-IP, the correct workflow requires:

Install the base TMOS imageon an unused boot volume

Install the corresponding HotFixonto that same boot volume

Activate the updated boot volumeto boot into the new software

This method ensures:

The existing active system (HD1.1) is untouched

The upgrade occurs in a new, clean volume (HD1.2)

The HotFix applies properly to the same base image

The administrator can revert to HD1.1 if issues occur

OptionCmatches the correct F5 upgrade sequence:

1. Install base image on HD1.2

2. Install HotFix on HD1.2

3. Activate HD1.2

Why the other options are incorrect:

A. Install HotFix before base image

HotFixes must be appliedafterthe base image; not valid.

B. Installing a HotFix on the active boot location (HD1.1)

Not recommended and does not use a clean new volume.

Also does not involve installing the base image.

D. Activating HD1.2 before installing anything

Cannot activate an empty or invalid boot volume.

Thus,Option Cis the correct sequence.