An Implementation Engineer is installing a FlashArray//XR4 and needs to add an extra card to...

When expanding a FlashArray//XR4 with additional DirectFlash Shelves (DFS), discrete PCIe Ethernet/RoCE cards are added to the chassis to provide the necessary backend connectivity. The FlashArray operating system (Purity) enumerates network interfaces sequentially based on slot order and onboard port detection.

On the //XR4 platform, the onboard ports and standard primary expansion slots typically occupy the interface names eth0 through eth5 (depending on the exact transceiver and daughter card configuration, where eth0-3 are often onboard/mezzanine). When a new 2-port expansion card is installed into the designated slot (e.g., Slot 3) to support a second shelf loop, Purity assigns the next available interface identifiers to these physical ports.

In a standard deployment configuration for a second shelf, these new ports are enumerated as ETH6 and ETH7 . The Implementation Engineer should verify these specific interfaces in the GUI or CLI (pureport list) to ensure the card is recognized and to cable the second shelf correctly to these ports, rather than assuming they will be eth4/5 which might be assigned to the first shelf or other internal functions.

=========