The following statement about the connection of the device is wrong?

The joints on the AP/power splitter/coupler/combiner/antenna are generally N-type male heads, and the two ends of the feeder are generally N-type female heads, and the two are connected to each other.

Under normal circumstances, the indoor system or the longer distance (greater than 50 meters) uses 7/8 lines, and the tributary or short-distance transmission uses 1/2 feeders.

1/2 super soft feeder is very thin and flexible. It is generally used in the case where the gap is small or the turning angle is large.

When the actual project calculates the feeder, the short feeder can directly calculate the number of standard feeders. After the long feeder needs to confirm the routing path, reserve 10%.

~20% feeder length