SR-MPLS uses the MPLS forwarding plane, and therefore requires MPLS to be enabled.

To automatically enable MPLS on an interface in SR-MPLS:

Segment routing must be enabled globally in the system view → ✅

Segment routing must also be enabled under the IGP process, and IGP (OSPF or IS-IS) must be enabled on the interface → ✅

Clarifications:

SRGB (Segment Routing Global Block) configuration defines SID ranges but does not trigger MPLS enablement → ❌

Static adjacency labels are advanced options and do not auto-enable MPLS → ❌

Correct answers: B, D