The default address of the WAN1 port on the ECC800-Pro is

In Huawei smart module commissioning, the ECC800-Pro controller provides a dedicated management access path through its WAN ports. For on-site startup commissioning, technicians typically connect a laptop directly toWAN1and place the laptop IP address in the same subnet as the controller so they can open the WebUI and complete initial settings (time, network, device discovery, alarm checks, linkage tests, and parameter commissioning). Thefactory default IP address for WAN1 is 192.168.8.10, which is used as the initial access point before the address is planned and changed to match the customer’s management network. This default design supports quick “point-to-point” commissioning without depending on upstream switches, DHCP services, or enterprise IP planning at the very beginning of deployment. After login, Huawei commissioning practice is to harden access (password/authentication completion), then update network parameters and integrate the ECC800-Pro into the site monitoring network to enable continuous O&M, remote alarm reporting, and device management.