The customer plans to roll out new HPE Aruba Networking CX 6000 and CX 6100...

The correct answer is D. A DHCP server needs to be configured with the required options. HPE Aruba Networking AOS-CX documentation for the 4100i, 6000, and 6100 switch series states that ZTP supports standards-based Zero Touch Provisioning and that the DHCP server must be configured to provide the required ZTP server information. The documentation lists supported DHCP options, including vendor-specific option 43, and explains that the switch contacts a DHCP server when it boots from a factory-default configuration. HPE Aruba documentation also explains that a trusted-network ZTP setup uses a TFTP server for configuration and image files, with the DHCP server providing the required information for the switch to find those files. Therefore, DHCP options are the required foundation for ZTP. Option A is misleading because ZTP is tied to a factory-default boot state, not simply being enabled on the management interface. Option B is incorrect because SCP is not the documented ZTP download method here. Option C is incorrect because the guide describes TFTP, not SFTP, for this ZTP workflow.