You are setting up user-based tunneling (UBT) between access layer AOS-CX switches and AOS-10 gateways.

Comprehensive Detailed Explanation

In a user-based tunneling (UBT) setup with reserved VLAN mode, VLAN 64 is used for routing traffic at the gateways. Since the IoT traffic is tunneled to the AOS-10 gateway:

On the gateways:

VLAN 64 must be configured in the iot-wired role for routing purposes.

On the switches:

VLAN 64 does not need to be configured on the access switch physical uplinks because the IoT traffic is tunneled directly to the gateway and does not rely on VLAN configurations at the access layer switches.

Reserved VLAN mode:

Ensures that traffic is encapsulated within the UBT tunnel, and VLANs like 64 are only relevant at the gateway for routing and enforcement.

Therefore, the correct configuration is to define VLAN 64 in the iot-wired role on the AOS-10 gateways and not on any physical interfaces.

References

Aruba AOS-CX UBT configuration guide.

Aruba AOS-10 Gateway Role and VLAN Management documentation.