[Exhibit]Click the Exhibit button.

Switch A is already fixed as the root bridge in this topology (priority 0), so the outcome being engineered here is not about root bridge election at all, but about which of Switch C's two available paths toward that already-established root — the direct C-to-A link, or the indirect C-to-B-to-A path — RSTP selects as the lower-cost, primary path. RSTP's path-cost calculation for any non-root switch sums the port costs of every link along a candidate path to the root and always selects whichever candidate path has the lowest total accumulated cost as that switch's active root path, placing the corresponding local port into the forwarding root port role while any higher-cost alternative path is placed into a non-forwarding (alternate) role. To force Switch C to prefer routing through Switch B rather than connecting to Switch A directly, the administrator must make the direct C-to-A link's cost higher than the combined cost of the C-to-B link plus the B-to-A link added together, so that the indirect, two-hop path through Switch B mathematically totals to a lower cumulative cost than the single direct hop, causing RSTP's cost comparison to favor the indirect path as primary. Setting Switch B's priority (to either 1 or 0) is irrelevant here, since Switch B is not a root bridge candidate in this scenario and priority manipulation would only affect a root bridge election, not path cost preference between a fixed root and a downstream switch. Lowering the direct link's cost, the inverse of the correct answer, would instead reinforce the direct path rather than override it. Reference topics: Junos Enterprise Switching – Spanning Tree Protocols, RSTP Path Cost and Root Port Selection.