ContextYou are asked to install a GNU software package from source code.

Objective: Configure, compile, and install the GNU software package already extracted into ~/bool, using its default build and installation settings.

The standard GNU build procedure consists of three main commands, executed in this exact order:

/configure

make

sudo make install

The official GNU Autoconf and Automake documentation confirms this sequence for packages using the GNU build system.

Step 1: Connect to the correct Linux server.

The task is associated with host lfcs00102.

From the candidate terminal, execute:

ssh lfcs00102

This establishes an SSH session with the server where the source-code package must be configured, compiled, and installed.

All subsequent commands must be executed on this host.

Step 2: Navigate to the software source directory.

Execute:

cd ~/bool

cd changes the working directory.

~ represents the current user's home directory.

bool is the directory containing the extracted software source code.

Verify the current directory:

pwd

Expected structure:

/home/candidate/bool

The actual home directory depends on the account used on the host.

Step 3: Inspect the extracted source files.

Execute:

ls -la

A GNU Autotools-based source package commonly contains files such as:

configure

Makefile.am

Makefile.in

configure.ac

README

INSTALL

src/

These are examples of commonly encountered files; the actual directory contents may differ.

The critical file for the first stage is:

configure

The task explicitly states that the package has already been unpacked and the required development tools are installed.

Therefore, there is no need to download another source archive, extract additional files, or install development packages.

Step 4: Verify that the configuration script exists.

Execute:

ls -l ./configure

Then check whether it is executable:

test -x ./configure

echo $?

Expected exit code:

0

If the file is readable but lacks execution permission, you can inspect its permissions:

stat -c '%A %a %n' ./configure

Before changing permissions, confirm that the file is the actual generated configuration script.

If necessary, a readable configure shell script can also be executed with:

sh ./configure

However, the normal and preferred invocation for this task is ./configure.

Step 5: Configure the software package using all default settings.

Execute:

/configure

This is the first essential command.

The configure script examines the system and prepares the source tree for compilation.

Typical checks include:

Operating system and processor architecture.

Available C compiler.

Compiler capabilities and flags.

Required libraries and header files.

Build utilities and dependencies.

Installation directory configuration.

Generation of Makefiles.

An illustrative output might include:

checking for gcc... gcc

checking whether the C compiler works... yes

checking for stdio.h... yes

checking for stdlib.h... yes

checking for make... make

configure: creating ./config.status

config.status: creating Makefile

The output will differ according to the source package.

Important: The task requires all default settings. Therefore, do not specify configuration arguments such as:

/configure --prefix=/opt/bool

or:

/configure --disable-shared

unless explicitly requested.

Using plain ./configure ensures that the package's own default configuration options are selected.

GNU Autoconf documents that the default installation prefix is commonly /usr/local, although packages can choose another default.

Step 6: Verify that configuration completed successfully.

Immediately after ./configure finishes, execute:

echo $?

Expected:

0

Exit status 0 indicates that the configuration script completed successfully.

Next, verify the generated Makefile:

ls -l Makefile

You can also check for the configuration status file:

ls -l config.status

For a standard Autoconf package, these files indicate that configuration generated the instructions required for compilation.

If configuration reports a missing dependency or another error, investigate that specific error before proceeding to the build stage.

Do not assume that configuration succeeded merely because some files were generated.

Step 7: Inspect the generated Makefile.

Execute:

ls -lh Makefile

The Makefile contains the instructions that GNU Make uses to build and install the software.

You can inspect the default installation prefix:

grep -E '^prefix[[:space:]]*=' Makefile

A typical result is:

prefix = /usr/local

This means that the package is configured to install files under /usr/local, unless it defines different destinations.

Common GNU installation directories include:

Directory

Typical purpose

/usr/local/bin

User executables

/usr/local/sbin

Administration executables

/usr/local/lib

Program libraries

/usr/local/include

Header files

/usr/local/share

Architecture-independent data

Do not modify the installation prefix because the task requires the default settings.

Step 8: Build the software package.

Execute the second essential command:

make

This instructs GNU Make to build the software using the generated Makefile.

During compilation, Make may perform operations such as:

Reading the Makefile.

Identifying source files and dependencies.

Invoking the compiler.

Compiling source files into object files.

Linking object files with required libraries.

Producing executable programs or library files.

For a package written in C, an illustrative compilation sequence may look like:

gcc -DHAVE_CONFIG_H -I. -c main.c -o main.o

gcc -DHAVE_CONFIG_H -I. -c util.c -o util.o

gcc -o program main.o util.o

These commands are examples. The actual compilation operations depend on the package.

GNU Make normally builds the default target when invoked without arguments. For standard GNU packages, this is equivalent to the all target.

Step 9: Understand why make should normally run without sudo.

The recommended command is:

make

Not:

sudo make

Building as the normal user is preferable because it avoids creating root-owned intermediate files inside the source directory.

Administrative privileges are generally necessary only when installing files into protected system directories.

Since the task states that all build dependencies are already installed, the compilation should not require additional package installation.

Step 10: Verify that compilation completed successfully.

Immediately after make finishes, execute:

echo $?

Expected output:

0

This confirms that the Make process returned a successful exit status.

If compilation fails, the terminal normally reports an error, such as:

make: *** [Makefile:150: all] Error 2

Such output indicates a failed build.

Investigate the preceding compiler or linker error before continuing.

Do not attempt to install a package that has not built successfully.

Step 11: Confirm the build target is up to date.

You can run:

make

again after a successful build.

If no source files have changed, Make may display:

make: Nothing to be done for 'all'.

Alternatively, it may run a small number of checks or other build commands.

This is expected behavior: Make determines which targets need rebuilding based on its rules and dependencies.

A second build is optional and does not replace checking the first command's exit status.

Step 12: Run the package tests if supported.

Many GNU software packages provide an optional test target:

make check

This runs tests defined by the package's build system.

The official GNU Automake documentation defines make check as the conventional test-suite target.

However, the task does not explicitly require running tests.

Therefore, this step is optional. Use it only if the package provides the target and running the tests is appropriate.

If tests are run, verify their outcome:

echo $?

Expected successful status:

0

Do not confuse make check with make install. Tests validate a build but do not necessarily install it.

Step 13: Install the compiled software package.

After a successful build, execute:

sudo make install

This is the third essential command.

sudo provides administrative privileges.

make executes the build system's specified target.

install invokes the Makefile's installation rules.

The command installs the compiled software into its configured destinations.

Depending on the package, installation may include:

Copying executable binaries.

Installing shared or static libraries.

Installing header files.

Installing documentation and manual pages.

Installing additional package data.

The installation location follows the settings selected during ./configure.

GNU Automake confirms that make install copies the required built files into their installation directories.

Step 14: Do not change the installation destination.

The task specifically requests the default configuration.

Therefore, avoid commands such as:

sudo make install prefix=/opt/custom

Also avoid reconfiguring the package using:

/configure --prefix=/opt/custom

These would change the normal installation destinations.

The appropriate installation command remains:

sudo make install

Step 15: Verify that installation completed successfully.

Immediately after sudo make install finishes, execute:

echo $?

Expected:

0

A zero exit code indicates that the installation target completed successfully.

If installation fails with a permissions error, verify whether administrative privileges were applied correctly and inspect the affected directory.

If a build or dependency error occurs during installation, resolve that error before treating the task as complete.

Step 16: Verify the installation destination.

Inspect the installation prefix recorded in the Makefile:

grep -E '^prefix[[:space:]]*=' Makefile

If the prefix is /usr/local, the installed files will typically be placed in appropriate directories beneath that prefix.

You can inspect standard executable locations:

ls -lt /usr/local/bin/

And, where appropriate:

ls -lt /usr/local/lib/

These commands can help identify newly installed files, but they are not conclusive on their own because other software may already exist in those directories.

For more precise verification, inspect the package's Makefile installation rules or any installation manifest it produces.

Step 17: Verify the installed executable if applicable.

If the package installs an executable, first determine its actual command name from the package's documentation or installation output.

Then execute:

command -v ACTUAL_EXECUTABLE_NAME

For example, if a package installs an executable called example-program:

command -v example-program

You can then check its version if that option is supported:

example-program --version

These commands are illustrative. The directory name bool does not prove that the installed executable is also named bool.

Do not invent an executable name when validating the installation.

Step 18: Run installation checks if the package supports them.

Some GNU packages provide the following target:

make installcheck

This runs checks against installed software rather than files within the build tree.

GNU Automake documents installcheck as an optional target for validating installed programs and libraries.

It is not mandatory for this question.

The task requires configuration, compilation and installation. A successful sudo make install operation satisfies the installation stage.

Step 19: Understand why the three commands must be executed in order.

Order

Command

Purpose

1

/configure

Detects the build environment and prepares Makefiles using default settings

2

make

Compiles and links the source code

3

sudo make install

Installs the built software into the configured system directories

Each stage depends on the preceding stage.

Running make before a successful configuration might fail because the necessary Makefile has not been generated.

Running make install without a successful build may also fail or cause the installation target to attempt compilation. That does not replace the explicitly required build step.

For the LFCS simulation, execute each required stage separately and verify success before continuing.

Step 20: Perform the final verification.

From the source directory:

cd ~/bool

Check the generated Makefile:

test -f Makefile & & echo "Makefile exists"

Check the configuration status file if the package uses Autoconf:

test -f config.status & & echo "Configuration completed"

Confirm the configured prefix:

grep -E '^prefix[[:space:]]*=' Makefile

Check that the build is up to date:

make

Finally, verify the installed files or executable using the actual package name and installation output.

A successful result must satisfy all requirements:

Requirement

Expected result

Correct host

lfcs00102

Source directory

~/bool

Configure with defaults

Successful

Build package

Successful

Install package

Successful

Custom configure options

None

Source extraction

Already completed

Dependency installation

Already completed

Final Solution

The complete essential command sequence is:

Copy commands

# Connect to the designated host

ssh lfcs00102

# Navigate to the extracted source package

cd ~/bool

# Inspect the source files

ls -la

ls -l ./configure

# Step 1: Configure with default settings

/configure

# Step 2: Build the software package

make

# Step 3: Install the built package

sudo make install

To verify the exit status of each stage reliably, use the following alternative, which stops if a required stage fails:

cd ~/bool || exit 1

/configure & &

make & &

sudo make install

This short sequence is appropriate when the provided tools and dependencies are already available, as specified in the task.

Technical Verification and References

The solution has been validated against the official GNU build-system documentation.

GNU Autoconf Manual — Explains the generated configure script and default configuration settings.

GNU Make Manual — Explains compilation using Makefiles and Make targets.

GNU Automake — Standard Targets — Documents make, make check, make install and make installcheck.

Expected result: The GNU software package located at ~/bool is successfully configured using its default settings, compiled using GNU Make, and installed through its Makefile's installation target.

Verification limitation: The prescribed sequence is supported by official GNU documentation. Whether the commands successfully complete on lfcs00102 must be confirmed from their actual terminal output and exit statuses; the supplied recording does not establish an independently tested successful installation.