A network administrator installs a node that requires a media converter to connect Ethernet to...

The correct answer is A. The TX/RX connection is transposed . In fiber optic networking, communication requires proper alignment of the transmit (TX) and receive (RX) strands between devices. If these are reversed (not crossed correctly), the devices cannot properly send and re ceive signals, resulting in no link light . This is a common issue when working with fiber connections and media converters.

The scenario confirms that cables are tested and functional, and all devices are powered on, which eliminates physical damage or power issues. Fiber cables can still pass basic continuity tests while being incorrectly connected (TX to TX and RX to RX instead of TX to RX), which prevents link establishment.

Option B is incorrect because duplex mismatch (such as half vs. full duplex) typically causes performance issues like collisions and slow throughput, not a complete loss of link light. Option C is ruled out because the cables were tested successfully. Option D refers to errors that occur after a link is established, not a condition preventing link initialization.

According to CompTIA Network+ objectives, proper fiber polarity (TX/RX alignment) is critical for link establishment, making this the most accurate cause.