A network engineer configures the network settings in a new server as follows:IP address =...

The default gateway for a network should be an IP address within the subnet, but not the broadcast address. In this case:

IP: 192.163.1.15

Subnet Mask: 255.255.255.0

This means the network range is: 192.163.1.0 - 192.163.1.255

192.163.1.255 is the broadcast address for this subnet, so it cannot be used as a gateway.

Hence, the device fails to communicate outside its subnet because it's trying to use a broadcast address as its gateway.

✅ The issue is clearly with the gateway configuration.