During cluster validation, the Cable Validation Tool (CVT) reports " Underperforming (BER) " for an...

NVIDIA ' s Cable Validation Tool (CVT) and the Unified Fabric Manager (UFM) use strict Bit Error Rate (BER) thresholds to ensure the stability of NDR (400G) and HDR (200G) InfiniBand fabrics. Because modern high-speed links rely on Forward Error Correction (FEC) to fix minor bit flips, a " Raw BER " (errors before FEC) is expected, but must remain within a specific envelope—typically better than $10^{-12}$. However, the " Effective BER " (errors after FEC) should ideally be zero or incredibly low (less than $1.5 \times 10^{-254}$) over a long observation window. If these thresholds are exceeded within a standard 6-hour monitoring period, it indicates that the signal-to-noise ratio is too low for the FEC to maintain a reliable stream. This leads to packet drops and " Symbol Errors " that trigger InfiniBand " Retransmissions, " which are catastrophic for the performance of AI collectives like all_reduce. While Rx power variance (Option A) and temperature (Option D) are health indicators, they are causes of poor BER, not the BER threshold itself.