Which order of steps is the correct way to create a static route?

Enter the route and netmask

Enter the IP address for the specific next hop

Specify the outgoing interface for packets to use to go to the next hop

Add an IPv4 or IPv6 route by name Comprehensive Explanation: This is the correct order of steps to create a static route in a virtual router on the firewall. The first step is to enter the route and netmask for the destination network, such as 192.168.2.2/24 for an IPv4 address or 2001:db8:123:1::1/64 for an IPv6 address. The second step is to enter the IP address for the specific next hop, such as 192.168.56.1 or 2001:db8:49e:1::1. The third step is to specify the outgoing interface for packets to use to go to the next hop, such as ethernet1/1. The fourth step is to add an IPv4 or IPv6 route by name, such as route11. References:

Configure a Static Route - Palo Alto Networks